Kingston HyperX PC4000 Review @ Bytesector

"Another problem we faced was that the memory works great at the two ends of the memory setting (between 400 and 500) anything close to the middle, the system becomes unstable. This is apparently was caused by the memory timings used on the modules. So if you got a pair of these RAM modules and not satisfied with them cause of instability, then try changing the memory timings (with in reasonable range) and am sure that problem can be fixed."
This is the new DDR500 paired memory from Kingston and it appears to do pretty well though they had a little trouble between the two major landing points.

Related Web URL: http://www.bytesector.com/data/bs-article.asp?ID=1...